What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 02.07.2025 12:10

Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
Edit 2024–10.
There are two important concepts here.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
a photo is worth a thousand words.
so, what happens?
Is there a band whose members have been present for every one of their concerts?
2024–10–10[John johnson John Johnson ]
He then describes the function of a fuse.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
King & Queen of the Ring tournament brackets revealed - Cageside Seats
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
An AC voltage/ current source, and an ac inductive load.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
Do most narcissists have good intentions as long as you are under their control?
One
The bolt then partially travels down the line to your home.
Here is a simplified AC power diagram.
Do married men like sucking dick?
Because the load is inductive, the current lags the voltage.(by a bit).
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
But it can get overloaded, and no longer works.
(Dc diagram shown, AC is similar).
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
Big Cyberpunk 2077 Updates Were Thought To Be Done, But 2.3 Patch Launches Soon - GameSpot
The MOV will conduct when the voltage exceeds 50% of line voltage.
These devices are installed between the “hot” and “neutral” and protective ground.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
5 Observations on Jaguars Minicamp Day 2 - Sports Illustrated
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
It seems Mohan does not understand the difference between a comment and an Answer.
In schematic diagrams this is the symbol for a fuse:
What can anal toys bring to straight men?
but I think this circuit , shows a few more pieces.
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
eight
What should I do if I love someone who does not love me?
[old diagram got deleted by accident]
So, the voltage could go up to 500 volts, and the fuse will not open up.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
Now when you have a certain ac resistance, then a current flows in a loop.
At least they know the answer if they wanted it.
He then asserts :
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
This device then solves the entire problem.
What does a fuse do?
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
This is where this question deviates from being a 'generic' question, and becomes more specific.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
nine
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
A circuit breaker is similar, but is resettable.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
2024–10–14 [Omar Gharbi Omar Gharbi ]
But… the neutral is now “floating” because of the 1 ohm resistance.
but this device (an Inductor) … impedes the rapid changes in the current.
What is lightning?
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
This one hit behind the barn.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
A fuse is a non-resetable over current circuit protector.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
First Sentence:
what exactly is a ‘surge’ protector?
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
[image of Common-mode choke]
The other is “what does a “fuse” do?”
At one ohm, the resistor has a maximum of 1 watt power.
He then describes Rainy Season and Lightning.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
Barnstars:
the problem then depends on "how fast does the fuse operate?".
One is “what exactly is in a ‘surge protector’ ? ”
The third is lightning and “how it gets conducted into a home.”
These are simplified answers to the original question, and does not change anything I wrote above.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
Upvotes:
This is where the MOV conducts again, and dissipated the energy.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
It also is a device that limits the change in current flow.
2024–10–16 [ OO OLAOYE OYEBODE ]
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
For this case there are devices called Metal oxide varistors (MOV).
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
This is 'the assistant's answer'
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
I post the exact comment here.
There are three different concepts here that are getting confused.